Dlubal CRANEWAY 8.19.01 Free Download

Dlubal CRANEWAY 8.19.01 Free Download Latest Version for Windows. The program and all files are checked and installed manually before uploading, program is working perfectly fine without any problem. It is full offline installer standalone setup of Dlubal CRANEWAY 8.19.01 Free Download for supported version of Windows.

Dlubal CRANEWAY 8.19.01 Free Download Overview

Dlubal CRANEWAY is a very handy application for the structural design of the industrial cranes. This standalone program analyzes the craneway girders according to the Eurocode 3 EN 1993-6:2008-09 and DIN 4132:1981-02 and DIN 18800:1990-11. Dlubal CRANEWAY performs the stress analysis of crane runways as well as welds. You can also perform the fatigue design of the crane runways and welds. You can also perform the stability analysis for lateral torsional buckling according to the second-order analysis of torsional buckling. You can also download Proteus Professional 8.9 SP0.

During the calculations the crane loads of generated in the distances which are predefined. The load increment for the cranes moving across the crane runway can be set individually. The results from Dlubal CRANEWAY can be arranged in the result windows sorted by various different topics. All the design values are illustrated in the corresponding cross-section graphic. All in all Dlubal CRANEWAY is a handy application for the structural design of the industrial cranes. You can also download HVAC Solution Professional 9.

Features of Dlubal CRANEWAY 8.19.01 Free Download

Below are some amazing features you can experience after installation of Dlubal CRANEWAY 8.19.01 Free Download please keep in mind features may vary and totally depends if your system support them.

Stress analysis of crane runways and welds
Fatigue design of crane runways and welds
Deformation analysis

Plate buckling analysis for wheel load introduction

Stability analysis for lateral torsional buckling according to the second-order analysis of torsional buckling (1D FEA element)

General Stress Analysis

CRANEWAY performs the general stress analysis of a crane girder by calculating the existing stresses and comparing them with the limit normal, shear and equivalent stresses. Welds are also subjected to the general stress analysis with regard to parallel and vertical shear stresses and their superposition.

Fatigue Design

Fatigue design is performed for up to three cranes operating at the same time, based on the nominal stress concept according to EN 1993-1-9. In the case of the fatigue design according to DIN 4132, a stress curve of crane passages is recorded for each stress point and evaluated according to the Rainflow method.

Buckling Analysis

Buckling analysis considers the local introduction of wheel loads according to the standard EN 1993-6 or DIN 18800-3.

Deformation Analysis

Deformation analysis is performed separately for the vertical and horizontal direction by comparing the designed displacements with the allowable values. You can individually specify the allowable deformation ratios in the calculation parameters.

Lateral-Torsional Buckling Analysis

The flexural-torsional buckling analysis is performed in accordance with the second-order analysis for torsional buckling considering imperfections. The general stress analysis has to be fulfilled with the critical load factor smaller than 1.00. As a result, CRANEWAY displays the corresponding critical load factor for all load combinations of the stress analysis.

Support Forces

The program determines all support forces on the basis of the characteristic loads including dynamic factors.

System Requirements for Dlubal CRANEWAY 8.19.01 Free Download

Before you install Dlubal CRANEWAY 8.19.01 Free Download you need to know if your pc meets recommended or minimum system requirements

Operating System: Windows Vista/7/8.1/10
Memory (RAM): 2 GB of RAM required.
Hard Disk Space: MB of free space required.
Processor: Intel Pentium 4 Processor or better.